November 16, 2026

How to Airdrop ERC-20 and BEP-20 Tokens: Ethereum, Base, BSC

How to airdrop ETH, BNB, ERC-20 and BEP-20 tokens to thousands of wallets on Ethereum, Base and BSC: approvals, gas, fees per chain and every step in the tool.

Sending a token to a thousand wallets on an EVM chain the normal way means a thousand transactions, a thousand signatures and a thousand times the base gas cost. A multisender bundles those transfers, so you sign a handful of transactions instead. This guide shows how to airdrop ETH, BNB, ERC-20 and BEP-20 tokens on Ethereum, Base and BNB Smart Chain (BSC): which tool to use, what approvals are, what it costs on each chain and how to avoid paying gas for a transaction that fails.

Which Tool Do You Need?

  • Ethereum: the Ethereum multisender sends ETH and ERC-20 tokens on Ethereum mainnet, and on the Sepolia testnet for practice.
  • Base: the Base multisender sends ETH and ERC-20 tokens on Base.
  • BSC: the BSC airdrop tool sends BNB and BEP-20 tokens on BNB Smart Chain.

All three work the same way and with any EVM wallet, such as MetaMask, Rabby, Coinbase Wallet, Trust Wallet or a mobile wallet through WalletConnect. You don't need an account, and you don't deploy a contract yourself.

How an EVM Airdrop Works

The tools send through the AirdropSender smart contract, which delivers many transfers in a single transaction:

  • Native coin: up to 200 recipients per transaction for ETH or BNB.
  • Tokens: up to 100 recipients per transaction for ERC-20 and BEP-20 tokens.
  • Service fee: paid inside each batch transaction, so there are no separate fee payments.
  • Custody: tokens go from your wallet to the recipients. The contract never keeps your funds.

A larger list is split into several of these batches, and you approve them one after another in your wallet.

Step by Step: Your First ERC-20 or BEP-20 Airdrop

  1. 1
    Connect your wallet

    Open the tool for your chain and connect your wallet. On the Ethereum tool you can switch between Mainnet and Sepolia at the top of the page.

  2. 2
    Choose what you send

    Your native balance and the tokens in your wallet are listed. Pick ETH, BNB or the token you want to distribute. A token that isn't listed can be added with its contract address.

  3. 3
    Set the amount

    Choose "Same for all" to give every wallet the same amount, or "Per wallet" to set an amount for each recipient in your list.

  4. 4
    Add your recipients

    Paste your list, upload a CSV file, or choose "Import holders" and enter the contract address of another token to load wallets that hold it. Each line is a wallet address, followed by a comma and an amount if you send different amounts.

  5. 5
    Review the airdrop

    Click "Review airdrop". You see the recipients, the service fee, an estimate of the gas and the balance you will have left. For lists up to 1,000 wallets, the ones that have never been used on-chain are marked, which helps you spot a mistyped address. Tick the box to confirm you checked the token and the amounts, then click "Start airdrop".

  6. 6
    Approve and send

    Sign the transactions in your wallet. For a token, the approval comes first and the batches follow. Keep the tab open until all transactions are confirmed.

  7. 7
    Check the result

    After each batch is confirmed, the tool checks for every recipient that the tokens arrived. When the airdrop is done, download the report with the status and transaction hash of every batch, for verification on Etherscan, BaseScan or BscScan.

Understanding Token Approvals

A smart contract can't move your ERC-20 or BEP-20 tokens without your permission. Before the first batch you approve the AirdropSender contract for the total you are about to send. A few things worth knowing:

  • Only when needed: if your existing allowance already covers the airdrop, no new approval is asked.
  • Exact amounts: you approve the total of this airdrop, not an unlimited amount.
  • USDT-style tokens: some tokens need the allowance reset to zero before a new approval. The tool does that for you with one extra transaction.
  • Native coin: an airdrop of ETH or BNB needs no approval at all.

What an Airdrop Costs on Ethereum, Base and BSC

You pay a service fee per recipient wallet, plus the gas of the network. Larger airdrops pay less per wallet: each wallet pays the rate of the bracket it falls in.

  • Ethereum: 0.00025 ETH per wallet for the first 1,000 wallets, 0.0001875 ETH for wallets 1,001 to 5,000 and 0.000125 ETH from wallet 5,001.
  • Base: the same rates as Ethereum, in ETH on Base.
  • BSC: 0.0008 BNB per wallet for the first 1,000 wallets, 0.0006 BNB for wallets 1,001 to 5,000 and 0.0004 BNB from wallet 5,001.

An example: a BEP-20 airdrop to 2,000 wallets on BSC costs 1,000 × 0.0008 + 1,000 × 0.0006 = 1.4 BNB in service fees, plus gas. Gas goes to the network, not to AirdropSender, and the Review step shows an estimate before you start. Gas is highest on Ethereum mainnet and much lower on Base and BSC.

Built-in Safety Checks

Mistakes on-chain are expensive and can't be undone, so the tool checks your airdrop before anything is sent:

  • Addresses: invalid addresses are flagged before you can continue.
  • Duplicates: a wallet that appears twice is reported with its line numbers, and it is paid once.
  • Token taxes: tokens that take a fee on every transfer are detected, and you are told that recipients will receive less than the listed amount.
  • Simulation: every transaction is simulated before you sign. If it would fail, you are not asked to sign it and no gas is spent.
  • Delivery: after confirmation, a batch is marked as delivered, partially delivered or unverified, so you know which recipients to look at.

The contract itself has no owner and can't be changed or paused. Its source code is verified on Etherscan, BaseScan and BscScan, so anyone can read what it does.

Tips to Save Gas and Avoid Failed Transactions

  • Test first: run the same airdrop on Sepolia with testnet ETH before you go to Ethereum mainnet.
  • Pick the chain: Base and BSC have much lower network fees than Ethereum mainnet, which suits large community airdrops.
  • Time it: gas on Ethereum mainnet varies during the day. Sending in a quiet period lowers the total.
  • Keep a buffer: hold a little more ETH or BNB than the estimate, because gas can rise between the review and the last batch.
  • Clean your list: remove exchange deposit addresses and known bot wallets before you send.

Frequently Asked Questions

How do I airdrop BEP-20 tokens on BSC?

Open the BSC airdrop tool, connect your wallet, pick your BEP-20 token, add the recipient wallets, review the cost and sign the approval and the batches. Up to 100 token transfers go into one transaction.

How many wallets can I send to?

There is no fixed maximum. The list is split into batches of up to 200 wallets for ETH or BNB and 100 wallets for tokens.

Do I have to approve an unlimited amount?

No. The approval is for exactly the amount of the airdrop, and it is only asked when your current allowance is too low.

What if a transaction fails?

Every transaction is simulated first, so most failures are caught before you sign and cost no gas. A batch that failed or that you declined can be sent again. A batch that wasn't confirmed in time may still arrive, so check its transaction before you retry.

Can I airdrop to the holders of another token?

Yes. Choose "Import holders" and enter that token's contract address. Read more in our guide to holder lists.

Is the smart contract verified?

Yes. The source code is verified on Etherscan, BaseScan and BscScan, and the contract has no owner.

Solana or an EVM Chain?

Which chain you airdrop on is usually decided by where your token lives. If you do have a choice, think about your audience: Ethereum has the most established DeFi users, Base a fast-growing consumer and social community, and BSC is popular for affordable large distributions. Solana works differently, with token accounts and rent instead of approvals and gas; that is covered in how to airdrop tokens on Solana.

Ready to Airdrop?

Open the tool for your chain and run your first airdrop: Ethereum, Base or BSC. The fees and steps per chain are also on the pages for Ethereum, Base and BSC.

Ready to Get Started?

Send your first airdrop on Solana, Ethereum, Base or BSC. No coding needed.